? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 double-balanced mixer, 10 mhz - 3 ghz rev. v3 MD-123 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? usable to 4 ghz ? impedance: 50 ohms nominal ? maximum input power: 600 mw max. @ 25c, derated linearly to 85c @ 3.2 mw/c ? if port current: 50 ma max. ? mil-std screening available description transformers convert the lo and rf paths to bal- anced lines connecting to a low barrier, schottky diode ring quad. these transformers help provide excellent isolation between ports. fp-2 pin configuration pin no. function pin no. function 1 gnd 5 lo 2 gnd 6 gnd 3 gnd 7 gnd 4 if 8 rf
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 double-balanced mixer, 10 mhz - 3 ghz rev. v3 MD-123 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications 1 : t a = -55c to +85c parameter test conditions frequency units min typ max frequency range rf, lo ports if port 0.01 - 3 ghz 0.01 - 3 ghz ghz ghz ? ? ? ? ? ? conversion loss db ? ? 8.0 isolation lo to rf 10 - 500 mhz 500 - 1000 mhz 1000 - 3000 mhz db db db 25 30 25 ? ? ? ? ? ? lo to if 10 - 500 mhz 500 - 1000 mhz 1000 - 3000 mhz db db db 20 25 25 ? ? ? ? ? ? rf to if 10 - 500 mhz 500 - 1000 mhz 1000 - 3000 mhz db db db 20 25 20 ? ? ? ? ? ? dc polarity negative ? ? ? ? ? dc offset mv ? 7 ? rf input 1 db compression 1 db desensitization dbm dbm ? ? +7 +5 ? ? ssb noise figure within 1 db of conversion loss max. ? ? ? ? ? typical two tone im ratio with ?10 dbm input, each input 25 mhz and 35 mhz if 100 - 2000 mhz db ? >56 ? 1. all specifications apply when operated at +10 to +13 dbm available lo power with 50 ohm source and load impedance. 2. conversion loss is specified for if frequency of 10 mhz to 2 ghz. see if port bandwidth graph.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 double-balanced mixer, 10 mhz - 3 ghz rev. v3 MD-123 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves ordering information part number package MD-123 pin fp-2
|
